PL2303 USB TTL Converter Module, photo 2

PL2303 USB TTL Converter Module, photo 3

PL2303 USB TTL Converter Module, photo 4

PL2303 USB TTL Converter Module, photo 5

PL2303 USB TTL Converter Module, photo 6

PL2303 USB TTL Converter Module, photo 7

PL2303 USB TTL Converter Module

Part number PL2303

3 offers in stock at 3 shopsEGP 60 – 75

EGP 60 at Makers Electronics

Offers

lowest price first

Each offer shows the shop's own title.

PL2303 USB TTL Converter Module
Makers Electronics
checked 20 days ago
EGP 60
View
PL2303 USB to TTL Serial Converter Module
Most Electronic
checked 11 days ago
EGP 75
View
PL2303 USB to TTL Converter Module
Ampere Electronics
checked 19 days ago
EGP 75
View

Show 1 out of stock offer

PL2303 PL2303HX USB To TTL(Serial) Converter Module 5 Pin
Micro OhmOut of stock
Price may be out of date (74 days)
EGP 70
View

Details

FromMakers ElectronicsMicro OhmMost ElectronicAmpere Electronics

From Makers Electronics's description

PL2303 UART Module integrated with PL2303 IC from Prolific Technology, which is a single-chip USB to UART bridge IC. This USB-to-UART bridge controller provides a simple solution to update the design of the RS-232 using minimal components and PCB space. Royalty-free Virtual COM Port (VCP) allows device drivers as a COM port in PC applications. This module allows an asynchronous serial data bus (UART) with a USB 2.0 full-speed function controller, USB transceiver, and full modem control signal. PL2303 UART Module Pinout Configuration Pin Name Description 3.3V 3.3V VCC pin 5.0V 5.0V VCC pin TxD Asynchronous data output (UART Transmit) RxD Asynchronous data input (UART Receive) GND Ground The circuit board has connectors raster 2.54 mm suitable for breadboards or to connect using wires. Attention! This device does not work with Windows 8, 8.1 and 10. Specifications: USB to TTL Serial Converter USB to TTL Adapter. Use this device to connect your PC to a serial (TTL level) device. Standard USB type A male and TTL 6pin connector. 6 pins for 3.3V, RST, TXD, RXD, GND & 5V. All handshaking and modem interface signals. Baud rates: 300 bps to 1.5 Mbps. Byte receive buffer; 640 byte transmit buffer. Hardware or X-On/X-Off handshaking supported. 3.3V & 5.0V operations for DDWRT support on different voltage system 500mA self-recovery fuse for protection. Two data transmission indicators can monitor data transfer status in real time Works with existing COM port PC applications. Ready for Windows 8/7/Vista/Server 2003/XP/2000/CE Plastic coating protection from standard wear and tear. PCB Size : 30 x 15 mm PL2303 Module Overview The main USB to UART bridge IC is PL2303. This PL2303 UART module is a USB to TTL UART Converter module which is based on PL2303 Bridge by Prolific Technology. This PL2303 UART module is compliant with USB2.0 full-speed devices with an integrated transceiver. It has real-time LEDs on the data lines that provide data transfer status in real-time. A 500 mA of a self-recovery fuse is used for protection purposes. This module can be used as a standard serial port with Laptops that don’t have a standard serial port. This module creates a virtual COM port using USB on your computer which can support various standard Baud Rates (300 bps to 1 Mbps) for serial communication. This module includes the TX (transmit) and RX (receive) data signals. Interfacing Diagram The interfacing of the PL2303-based UART module is quite easy. Follow the below image to connect the module. The UART module can be interfaced with any microcontroller unit that has a UART interface. Applications Debug purpose in the development Microcontroller to PC communication Programming related purposes

From Micro Ohm's description

PL2303 PL2303HX USB To TTL(Serial) Converter Module 5 Pin This is PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin. Adopt imported controller RS232 TTL, which can stabilize the flash with high-speed 500mA self-recovery fuse for protection. Two data transmission indicator can monitor data transfer status in real-time. Reserve 3.3V and 5V pin interface, easy for DDWRT of different voltage system that needs power. The entire board is coated by a high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside, so that the board won’t be burnt down by a material shortcut. For issues related to Prolific USB Windows 8.1 and Windows 10 driver, see the VIDEOS section. Applications : All kinds of satellite set-top box upgrade. Router, HDD, ADSL, broadband modem firmware upgrade or cracked upgrade. cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash and so on. Burn writes STC MCU, NXP MCU, Renesas MCU, NEC MCU and so on. Simple UART communication commonly used UART debugging tools in the supper terminal. USB signal transferred to the TTL signal may be used by electronic enthusiasts. Features : Adopt imported controller PL2303HX, which can stabilize the flash with high speed 500mA self-recovery fuse for protection. Two data transmission indicator can monitor data transfer status in real time. Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power. The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside. so that the board won’t be burnt down by material shortcut. The electrostatic package ensures the board will not be damaged before use. Support WIN7 system. Package Includes : 1 x PL2303 PL2303HX USB To TTL Module. Input Supply voltage (V) 3.3 ~ 5 Model PL2303HX Support Windows 98 to Windows 7 (32 bit and 64 bit) Mac OS 8 to OS X (32 bit and 64 bit) Linux Length (mm) 52 Width (mm) 15.5 Height (mm) 6.5 Weight (gm) 5 Shipment Weight 0.01 kg Shipment Dimensions 6 × 3 × 2 cm

From Most Electronic's description

PL2303 USB to TTL Serial Converter Module The PL2303 USB to TTL Serial Converter Module creates a serial connection between a computer and UART-enabled electronic devices. It converts USB data into TTL-level TX and RX signals for microcontrollers, development boards, routers, and embedded systems. The computer recognizes the converter as a serial COM port after installing the correct driver. Therefore, you can use terminal programs, programming tools, or development software to exchange serial data. In addition, the module may provide 3.3V and 5V power outputs. This feature helps power compatible low-current circuits during testing and configuration. Key Features PL2303 USB-to-UART converter chipset Converts USB to TTL serial communication TX and RX data connections Supports full-duplex UART communication 3.3V and 5V power outputs Creates a virtual serial COM port Compact and easy-to-use module Suitable for serial monitoring and debugging Works with common terminal applications Compatible with many microcontroller platforms No external serial power supply required for basic operation Technical Specifications Converter Type: USB to TTL UART Controller: PL2303 series Computer Interface: USB Device Interface: TTL UART Data Pins: TXD and RXD Power Outputs: 3.3V and 5V Communication: Asynchronous serial Operation: Full duplex Driver: May require a compatible PL2303 driver Supported Systems: Windows, Linux, and macOS with a suitable driver Module Pinout Pin labels may vary between production versions. However, most modules provide the following connections: 5V: USB 5V power output 3.3V: Regulated 3.3V power output GND: Common ground connection TXD: Serial data transmitted from the converter RXD: Serial data received by the converter Connect the converter’s TXD pin to the target device’s RX pin. Likewise, connect the converter’s RXD pin to the target device’s TX pin. Both devices must also share a common ground. Applications The converter provides a convenient serial connection for: Arduino serial communication ESP8266 and ESP32 debugging STM32 configuration and programming Microcontroller firmware uploading GPS and GSM module testing Router serial-console access Sensor and module configuration Bootloader communication Embedded-system diagnostics AT-command testing Important Connection Notes Check the required logic voltage before connecting the module. The 3.3V and 5V pins may indicate power outputs rather than selectable TX and RX logic levels. Also, do not connect the module’s power output if the target board already uses another power supply. Instead, connect only GND, TXD, and RXD when appropriate. This converter can upload firmware only when the target controller supports UART programming. Some boards also require manual BOOT or RESET control. Finally, verify the exact PL2303 chip version before downloading a driver. Older or non-genuine versions may not work with the newest operating-system drivers. Package Includes 1 × PL2303 USB to TTL Converter Module