DC-DC Boster MT3608 3V~28Vdc Adjustable Step-Up Converter Module 2A Micro USB

DC-DC Boster MT3608 3V~28Vdc Adjustable Step-Up Converter Module 2A Micro USB The MT3608 2A Max DC-DC Step Up Power Module Booster Power Module is a low-cost module that can step-up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A. DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs. This boost converter is adjustable and capable of outputting a voltage in the range of 5.0 to 28V at a continuous current of up to 1.5A depending on input/output voltage settings with 1A available with most settings. Since it is a boost converter, the input voltage must be lower than the output voltage. The device is able to use low ESR bulk ceramic capacitors rather than electrolytic caps which avoids long-term aging concerns and contributes to the compact packaging. The MT3608 converter IC has over-current and thermal limiting features built-in to safely shut the device down if driven too hard. Voltage Adjustment: The module has a single-turn potentiometer for adjustment of the output voltage. Turning the pot CW decreases the output voltage while turning it CCW increases the output voltage. The upper limit of the adjustment range will depend on the input voltage and the load. With a 9V input for instance, at 1A, the upper voltage limit will be approximately 20V. Module Connections These are compact boards with 4 solder pads for making connections. VIN+ = Input Voltage VIN- = Ground VOUT+ = Output Voltage VOUT- = Ground. Connected to VIN- on the module. Pad dimensions: Note: The input voltage should not exceed the maximum input voltage. Peak current output current is not more than 2A for input & output. Please be noted that the output voltage should be higher than the input voltage . Features : It’s efficient by up to 93%. It can source a good amount of current. It is an inexpensive converter module. It’s simple to adjust to get your desired increase in voltage. Package Include : 1Piece MT3608 2A Max DC-DC Step Up Power Module Booster. Datasheet DOWNLOAD Input Voltage (V): 2 ~ 24 Max. Output Current (A) 2 Operating Temperature (°C) -40 to 90 Efficiency 93% Length (mm): 37 Width (mm): 17 Height (mm): 7 Weight (g): 4 Shipping Weight 0.005 kg Shipping Dimensions 5 × 4 × 3 cm

MT3608 DC -DC Step Up Boost Module 2A with Micro USB The MT3608 DC-DC Step Up Boost Module 2A with Micro USB is a step-up(Boost) converter module intended for small and low-power applications. The module has the capability to regulate the output voltage up to 28V and deliver an output current of a maximum of 2A. The module consists of MT3608 IC which comes in a 6-Pin SOT23-6 Package switches at 1.2Mhz which allows the use of tiny capacitors and inductors leading to a compact size power boost module. Its Micro USB input, compact size, and adjustable output make it ideal for both hobbyist and professional applications. Features : Over heat protection. Small size. Upto 2 Ampere output current. Input voltage can be from 2V DC to 24V DC. The module can deliver 93% output accuracy. Output voltage is adjustable from 5V DC to 28V DC. Soft start function. Less quiescent current only 200uA max. Low cost. Using MT3608 high efficiency chip. Specifications : Input Voltage: 2-24V DC Output Voltage: 5-28V DC Maximum Output Current: 2A Switching Frequency: 1.2Mhz Output Ripple: <100mV Module Size: 37.2mm x 17.2mm x 14.0mm About 93% Efficiency Pin Configuration: Pin configuration of the Step up module is given in the table below. The module has 4 pins, 2 of which are for voltage input and 2 are for regulated output voltage. The module also consists of a potentiometer which can be used to adjust the output voltage levels. Pin Type Description VIN+ Voltage Input VIN- Ground VOUT+ Voltage Output VOUT- Ground Note: If the module output voltage is not being varied with the potentiometer, it means that the output voltage is equal to the input voltage. This usually happens when you use the module for the first time. You can turn the potentiometer around 20 times or more in a counterclockwise position and then once you get the regulated voltage at the output you can use the module. Applications: Power amplifiers. Battery power systems. Consumer electronic. DC motor drivers. Package Includes: 1x MT3608 Module with Micro USB. Data Sheet: MT308