Thermocouple with MAX6675 Module K-Type

Thermocouple with MAX6675 Module K-Type is a high-quality electronic component designed for Arduino, prototyping, and educational electronics. This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. It has a 12 bit reolution providing temperature readings from 0oC to 1024oC (max temperature of supplied sensor is 450oC) with a resolution of 0.25oC. Screw terminals allow for connection to the thermocouples spade connectors and a 5 pin standard 0.1″ header provides an interface to a microcontroller such as an Arduino development board. Supplied thermocouple sensor has a diameter of 4.5mm with a 6mm threaded mounting bolt. Total length of sensor including cable and spade connectors is ~100cm. Specifications: Thermocouple temperature range: 0 to 450oC Module sensor temperature range (oC): 0 to 1024 Temperature resolution (oc): 0.25 Module supply voltage: 3 to 5.5V Module current: 50mA Module interface: Serial (SO, SCK, CS) 16 bit SPI compatible. Termocouple accuracy (0-700oC): 8 LSBs Termocouple disconnect detection. Get some help from Below sites – http://www.instructables.com/id/Arduino-and-Thermocouple-K-MAX6675/ For Link to Llibrary for MAX6675 for Arduino, Click below – https://github.com/adafruit/MAX6675-library It’s perfect for DIY makers, students, and anyone building custom electronic circuits or STEM kits.

MAX6675 K-type thermocouple module specification of Max6675 : Brand new Power supply: 3.3 V Accuracy: ±2°C to ±6°C Output: -200°C to 1350°C feature of Max6675: Thermocouples are very sensitive and need a good amplifier with a cold compensation reference. The branch board has the chip itself, a 3.3V regulator with a 10uF bypass capacitor and a level conversion circuit, all assembled and tested. Equipped with a 2-pin terminal block (for connecting thermocouples) and pins (to plug into any breadboard or pouring board). In line with the logic level, the internal temperature reading. SPI data output requires 3 digital I/O pins. Durable and stable. With fixed installation holes, it is convenient for fixed installation. Suitable for any K-type thermocouple. note: Since the monitor is not calibrated the same, the color of the item displayed on the computer monitor may be slightly different.