ESP32 Development Board (WIFI and Bluetooth) with Ch340 USB Type-C

ESP32 Development Board CH340 USB Type-C WIFI and Bluetooth This is the ESP32S-DEV development board based on ESP-WROOM-32, features WiFi + Bluetooth connectivity, onboard USB CH340 and keys. What’s more, all the I/O pins of ESP-WROOM-32 module are accessible via the extension headers. The board has 2x15pin extension headers, which breakout all the I/O pins of the module and 2x keys, used as reset or user-defined Quick Spec ESP-WROOM-32 32-bit 240 MHz microprocessor Supply Voltage: 5V 2.4 GHz Wi-Fi Bluetooth 4.2 4 MByte (32Mbit) SPI Flash 448 KB ROM 520 KB SRAM 16 KB SRAM in RTC PCB Antenna Powered via USB Type-C Connector, or via pin header Reset and User/Firmware buttons User and Power LED USB Type-C connector Virtual USB port provided by CH340 for debugging and firmware upgrade Assembled with ESP-WROOM-32 module Dimensions: 51.5 x 28.5mm Pin-Out < Getting Started with ESP-32 Installing ESP-32 in the Arduino IDE Resources Installing ESP-32 in Arduino IDE ESP-32 Arduino Sample Code ESP32 WROOM 32 Datasheet ESP-32 Which IO Pins Should you use? Blinking an LED with ESP-32 – 3 Steps Installing MicroPython Additional Information ESP32-DEV Dimensions and Pin Spacing Shipping List 1 x ESP32 Dev Board CH340 – USB-C

This board is based on the popular Espressif ESP32 chip, and has WiFi & Bluetooth. It is assembled with an ESP-WROOM-32 module. It has 30 pins(2 rows of 15 each), and a USB Type-C connector. The USB to Serial converter is implemented with the CH340 chip. It also has the higher power SOT-223 linear regulator, which has a higher power rating than the SOT-23 type used on some other modules. Software can be developed using many different platforms, including Arduino. Features 2.4 GHz Wi-Fi Bluetooth 4 MByte(32Mbit) SPI Flash PCB Antenna Powered via USB Type-C Connector, or via pin header Reset and User/Firmware buttons User and Power LED USB Type-C connector Virtual USB port provided by CH340 for debugging and firmware upgrade Assembled with ESP-WROOM-32 module Compact size of 51.5 x 28.5mm Supply Voltage: 5V Documents ESP32-WROOM-32 Datasheet CH340C Datasheet

This board is based on the popular Espressif ESP32 chip, and has WiFi & Bluetooth. It is assembled with an ESP-WROOM-32 module. It has 30 pins(2 rows of 15 each), and a USB Type-C connector. The USB to Serial converter is implemented with the CH340 chip. It also has the higher power SOT-223 linear regulator, which has a higher power rating than the SOT-23 type used on some other modules. Software can be developed using many different platforms, including Arduino. Features 2.4 GHz Wi-Fi Bluetooth 4 MByte(32Mbit) SPI Flash PCB Antenna Powered via USB Type-C Connector, or via pin header Reset and User/Firmware buttons User and Power LED USB Type-C connector Virtual USB port provided by CH340 for debugging and firmware upgrade Assembled with ESP-WROOM-32 module Compact size of 51.5 x 28.5mm Supply Voltage: 5V Documents ESP32-WROOM-32 Datasheet CH340C Datasheet