Rechargeable 602018 LIPO Battery Cell 3.7V 170mAh Wire Solder

From the shop's description

Rechargeable 602018 LIPO Battery Cell 3.7V 170mAh Wire Solder The 602018 is a rechargeable lithium-polymer (LiPo) battery cell designed to provide lightweight, compact energy storage for portable electronic applications. Its slim, pouch-style construction makes it suitable for projects where space and weight are important. The battery features a nominal voltage of 3.7V and a capacity of 170mAh, making it useful for powering small circuits and electronic devices. This battery comes with soldered wires for convenient connection to compatible circuits and charging systems. It can be used in DIY electronics, miniature devices, and battery-powered prototypes. For safe operation, use a LiPo-compatible charging circuit configured for a single-cell battery, and ensure the charging voltage, current, and battery polarity are correct. Avoid puncturing, crushing, short-circuiting, or overcharging the cell. Features: Rechargeable lithium-polymer battery technology. Lightweight pouch-cell construction. Compact form factor for space-constrained designs. Pre-attached wires for convenient electrical connection. Suitable for portable and battery-powered electronics. Compatible with single-cell LiPo charging and protection circuits. Specifications: No. Item General Parameter Remark 1 Rated Capacity Typical: 180mAh Minimum: 170mAh Standard discharge(0.2C 5A) after Standard charge 2 Nominal Voltage 3.7V Mean Operation Voltage 3 Voltage at end of Discharge 3.0V Discharge Cut-off Voltage 4 Charging Voltage 4.2±0.03V 5 Internal Impedance ≤150mΩ Internal resistance measured at AC 1KHz after 50% charge The measure must uses the new batteries that within one week after shipment and cycles no more than 5 times 6 Standard charge Constant Current 0.2C5A Constant Voltage 4.2V 0.01 C5A cut-off Charge time : 2-3h 7 Standard discharge Constant current 0.2 C5A end voltage 3.0V 8 Fast charge Constant Current 0.5C5A Constant Voltage 4.2V 0.01 C5A cut-off Charge time : 1-2h 9 Fast discharge Constant current 0.5C5A end voltage 3.0V 10 Maximum Continuous Charge Current 1 C5A 11 Maximum Continuous Discharge Current 1C5A 12 Operation Temperature Range Charge: 0 ~ 45°C Discharge: -20 ~ 60°C 60±25%R.H. Bare Cell 13 Storage Temperature Range Less than 1 year: – 20 ~ 25°C less than 3 months: – 20 ~ 40°C 60±25%R.H. at the shipment state ⚠️ Precautions Never expose Batteries to extreme temperatures or direct sunlight. Do not store Li-Po batteries in extreme temperatures below 0°C or above 50°C. Always disconnect Batteries when not in use and store batteries in a non-conductive and fireproof container. Never charge a battery that is still warm after usage, and never use a battery that is still warm from charging. Applications: Miniature electronic devices. Wearable electronics. Portable sensors and monitoring devices. Small Bluetooth and wireless gadgets. DIY Arduino and microcontroller projects. Miniature robotics. Portable LED devices. Battery-powered prototypes. Packages Included: 1 × Rechargeable 602018 LIPO Battery Cell 3.7V 170mAh Wire Solder. Documents: Datasheet.