Relay Module 24V (8 Channel) Active Low Trigger

From the shop's description

Description: Relays module, 8 channels with opto-isolation – 10A / 250VAC contacts – 24V coil – blue The module allows to control the actuators consuming the current up to 10 A using the microcontroller’s ports or any starting set (includingArduino,Raspberry Piand STM32Discovery). Optical isolation seperates the control signal from the part associated with the power of relay, thereby providing safety of the control system’s work. The product is compatible with Arduino For relay control, a digital signal controlled from leads of the Arduino, is enough . Connecting For proper operation, it is sufficient to connect the power of the relay coil and the digital control signal. Leads are the standard strap goldpin with raster of 2.54 mm, which enables connection through the connecting cables. The relay has the following leads: VCC – power of optical isolator GND – mass of system IN1 … IN8 – controlling inputs of the relays, activated by low state The jumper JD-VCC – connects the power of the relay’s coil with opitical isolator’s power Connector KF (ARK) – the relay’s contacts connected in accordance with the pattern on plate of the module. Examples of application Driver of lighting The driver of executors Switch for electric devices, including motors Specification The supply voltage VCC: 24 V Activated through low state Relay JQC-3FF-S-Z ( documentation ) Coil voltage: 24 V The maximum voltage of contacts: 250 V AC, 125 VDC* Maximum current: 10 A Optoelectronic isolation 8 leds signalizing the activation of relay Size: 139 x 56 mm Diameter of mounting holes: 3 mm * Maximum contact voltage depends on the type of load – details in the documentation , tab. Contact Data. Useful links Documentation of relay JQC-3FF-S-Z