PIC16F630 8-Bit FLASH CMOS Microcontroller 2.0–5.5V 8.5µA PDIP-14

From the shop's description

PIC16F630 8-Bit FLASH CMOS Microcontroller 2.0–5.5V 8.5µA PDIP-14 The PIC16F630 is a 14-pin FLASH-based 8-bit CMOS microcontroller from Microchip, featuring a RISC CPU with 35 instructions, operation up to 20MHz oscillator/clock input, 12 general-purpose I/O pins, FLASH program memory, SRAM, EEPROM data memory, an analog comparator with programmable voltage reference, Timer0 and Timer1, interrupt capability, multiple oscillator options, SLEEP mode, Watchdog Timer, Brown-out Detect, and In-Circuit Serial Programming (ICSP). Features 8-bit RISC CPU architecture Only 35 instructions Single-cycle instructions except branches Up to 20MHz oscillator/clock input 200ns instruction cycle 8-level deep hardware stack Direct, indirect and relative addressing 1K x 14 words FLASH program memory 64 bytes SRAM 128 bytes EEPROM 12 general-purpose I/O pins Individual I/O direction control High-current sink/source capability for direct LED drive Analog comparator module Programmable on-chip comparator voltage reference (CVREF) Timer0 8-bit timer/counter with programmable prescaler Enhanced Timer1 16-bit timer/counter with prescaler Internal and external oscillator options Precision internal 4MHz oscillator calibrated to ±1% SLEEP power-saving mode Power-on Reset (POR) Power-up Timer (PWRT) Oscillator Start-up Timer (OST) Brown-out Detect (BOD) Watchdog Timer with independent oscillator Interrupt-on-pin-change Individual programmable weak pull-ups Programmable code protection In-Circuit Serial Programming via two pins FLASH endurance: 100,000 write cycles EEPROM endurance: 1,000,000 write cycles FLASH/Data EEPROM retention: greater than 40 years Industrial and Extended temperature options Specifications Manufacturer Microchip Technology Part Number PIC16F630 Device Type 8-Bit FLASH-Based CMOS Microcontroller CPU Architecture High Performance RISC CPU Instruction Set 35 instructions Maximum Oscillator / Clock Input 20 MHz Instruction Cycle 200 ns Operating Voltage 2.0 V to 5.5 V Typical Operating Current 8.5 µA @ 32 kHz, 2.0 V Typical Operating Current 100 µA @ 1 MHz, 2.0 V Typical Standby Current 1 nA @ 2.0 V Watchdog Timer Current 300 nA @ 2.0 V, typical Program Memory 1024 x 14 words FLASH Data RAM 64 bytes Data EEPROM 128 bytes I/O Pins 12 Analog Comparator 1 comparator with programmable on-chip comparator voltage reference Timer0 8-bit timer/counter with 8-bit programmable prescaler Timer1 16-bit timer/counter with prescaler and external gate input mode Oscillator Options Internal and external oscillator options Internal Oscillator 4 MHz precision internal oscillator, factory calibrated to ±1% Reset / Protection POR, PWRT, OST, Brown-out Detect and Watchdog Timer Interrupt Features Interrupt capability and interrupt-on-pin-change Programming In-Circuit Serial Programming (ICSP) via two pins FLASH Endurance 100,000 write cycles EEPROM Endurance 1,000,000 write cycles Data Retention Greater than 40 years for FLASH/Data EEPROM Operating Temperature -40°C to +85°C (Industrial); -40°C to +125°C (Extended) Applications Embedded control designs requiring an 8-bit microcontroller Designs using multiple general-purpose digital I/O pins Timer and counter-based control Comparator-based signal monitoring Low-power battery-oriented designs using SLEEP mode Designs requiring non-volatile FLASH and EEPROM memory Systems requiring ICSP in-circuit programming LED drive and other applications using the device’s high-current I/O capability Package Content 1 x PIC16F630 8-Bit FLASH CMOS Microcontroller 2.0–5.5V 8.5µA PDIP-14 DataSheet PIC16F630