V-slot gantry plate

From the shop's description

With this V-slot gantry plate you can easily add movement to a project. Thanks to the 4 wheels and the 2 eccentric nuts, you can adjust the V-slot plate perfectly. After the gantry is perfectly adjusted there are countless possibilities with the plate, other profiles can be attached to it, timing belts can be attached to it, motors can be attached to it and there are many other options. The plate is supplied with 4 wheels and mounting materials and only needs to be adjusted to the V-slot profile. To adjust the V-slot plate an 8mm open-end wrench spanner is needed, with which the eccentric nut can be turned so that the wheels come closer or further from the profile. Pay close attention to the running direction of the gantry, the slotted holes in the plate must always be turned with respect to the running direction. If the slotted holes run parallel to the running direction of the carriage, the plate cannot be adjusted.