APC Power-Saving Back-UPS ES 550VA, 230V, 8 Outlets, CEE 7/7 Without Battery

BE550-GR Features Key Features • Output power capacity: 330 Watts / 550VA • Output Connections: • (4) Schuko CEE 7 (Surge Protection) • (4) Schuko CEE 7 (Battery Backup) • Nominal Output Voltage: 230V • Nominal Input Voltage: 230V • Input Connections: Schuko CEE 7/7P • Cord Length: 1.8meters APC Power-Saving Back-UPS ES 550VA, 230V, 8 Outlets, CEE 7/7 Battery Backup & Surge Protector for Electronics and Computers Includes: CD with software, Telephone cable, User manual • Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. • Audible alarms: Provides notification of changing utility power and UPS power conditions • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced. • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance • Battery replacement without tools: Enables fast battery replacement, lowering Mean Time to Repair (MTTR). • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment • Cold-start capable: Provides temporary battery power when the utility power is out. • Dataline surge protection: Provides protection of connected equipment from power surges on the data lines. • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs) • Safety-agency approved: The UPS is UL1778 Listed Back-UPS Features & Benefits Availability • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging. • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced. Marketing Features • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Manageability • Audible alarms: Provides notification of changing utility power and UPS power conditions • LED status display: Quickly understand unit and power status with visual indicators. Safety • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Protection • Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage. • Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes. Technical Specifications Output • Max Configurable Power (Watts): 330 Watts / 550VA • Output Frequency (sync to mains): 47 – 63 Hz Sync to mains, 50 Hz +/- 0.1 % For 50 Hz nominal Unsynchronised • Topology: Standby • Waveform type: Stepped approximation to a sinewave • Output Voltage Tolerance: +/- 5% static and 100% load step • Transfer Time: 6 ms typical : 10 ms maximum Input • Input frequency: 50/60 Hz • Input voltage range for main operations: 180 – 266V Surge Protection and Filtering • Surge energy rating: 310Joules • Filtering: Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 Physical • Maximum Height: 89MM, 8.9CM • Maximum Width: 224MM, 22.4CM • Maximum Depth: 311MM, 31.1CM • Net Weight: 6.02KG Environmental • Operating Temperature: 0 – 40 °C • Operating Relative Humidity: 0 – 95 % • Operating Elevation: 0 – 9144meters • Storage Temperature: -15 – 40 °C • Storage Relative Humidity: 0 – 95 % • Storage Elevation: 0 – 9144meters • Audible noise at 1 meter from surface of unit:40.0dBA Note: Need to Install NEW battery 12V 7Ah. (Not Included) Documentation User Manual Back-UPS BE550G/BE700G Package Includes: • APC Power-Saving Back-UPS ES 550VA, 230V, 8 Outlets, CEE 7/7 (Without Battery) • CD with software • Telephone cable • User manual