PCF8574 I2C I/O Expansion Module

From the shop's description

PCF8574 I2C I/O Expansion Module The PCF8574 I²C I/O Expansion Module is designed to extend the input/output capabilities of microcontrollers through the I²C interface. It provides 8 quasi-bidirectional GPIO pins (P0–P7), allowing each pin to function as either an input or output without the need for a separate data-direction control signal. This flexibility makes it suitable for various applications, including driving LEDs, reading switches, and interfacing with sensors. The module features an open-drain interrupt output (via INT pin), enabling efficient monitoring of input changes without continuous polling. Multiple PCF8574 modules can be connected on the same I²C bus, with configurable addresses (via A0–A2 pins) allowing up to 8 devices, thereby expanding the I/O count to 64. Its low power consumption and compatibility with 3.3 V and 5 V systems make it an excellent choice for embedded and battery-powered applications. Features Adds 8 digital I/O pins via I2C interface with PCF8574. Quasi-bidirectional I/O pins configurable as inputs or outputs. Open-drain interrupt output for efficient input change detection. Supports up to 8 devices on the same I2C bus with configurable addresses. Low standby current consumption, suitable for low-power applications. Compatible with 3.3V and 5V logic levels. High-current drive capability for directly driving LEDs. No need for separate data-direction control signals. Compact module size for easy integration into projects. Ideal for expanding GPIO in microcontroller-based systems. Specifications Parameter Details Operating Voltage 2.5 V–6 V Standby Current < 10 µA I/O Pins 8 quasi-bidirectional I2C Address Configurable Yes, via A0–A2 pins (up to 8 devices) Interrupt Output Open-drain, active LOW I2C Interface Speed Up to 100 kHz (Standard-mode) Logic Level Compatibility 3.3 V and 5 V systems Output Drive Capability High-current drive for LEDs Package Types Various (e.g., SOIC, PDIP, TSSOP) Pin Function A0 Address bit 0: tie to GND (0) or VCC (1) to set the least significant address bit (value = 1). A1 Address bit 1: tie to GND (0) or VCC (1) to set the next address bit (value = 2). A2 Address bit 2: tie to GND (0) or VCC (1) to set the next address bit (value = 4). GND Ground reference, common with microcontroller ground. VCC Power supply (2.5 V – 6 V), typically 3.3 V or 5 V SDA I²C data line (open-drain), requires pull-up resistor to VCC. SCL I²C clock line (open-drain), requires pull-up resistor to VCC. INT Open-drain interrupt output (active LOW). Goes LOW when any input-configured pin (P0–P7) changes state; cleared by reading or writing the I/O ports. P0 Quasi-bidirectional I/O pin 0: can function as input (with internal pull-up) or output (driving LOW or HIGH as float). P1 Quasi-bidirectional I/O pin 1: same operation as P0. P2 Quasi-bidirectional I/O pin 2: same operation as P0. P3 Quasi-bidirectional I/O pin 3: same operation as P0. P4 Quasi-bidirectional I/O pin 4: same operation as P0. P5 Quasi-bidirectional I/O pin 5: same operation as P0. P6 Quasi-bidirectional I/O pin 6: same operation as P0. P7 Quasi-bidirectional I/O pin 7: same operation as P0; unused pins should be configured as outputs to prevent floating. Note: Unused P0–P7 pins should be configured as outputs (e.g., write LOW) to prevent floating inputs and reduce power consumption. Applications Expanding GPIO for microcontrollers with limited I/O pins. Driving LEDs, relays, and other output devices. Reading inputs from switches, buttons, and sensors. Implementing keypad interfaces. Home automation systems. Industrial control and monitoring. Embedded systems requiring additional I/O. Battery-powered applications needing low standby current. Projects requiring multiple I/O expanders on a single I2C bus. Educational and prototyping platforms. Package Contents 1x PCF8574 I2C I/O Expansion Module. Documents PCF8574 Chip Datasheet Tutorial using Arduino Programming Resource