32-Channel Servo Controller

featuers • Operating voltage : 5 V • CPU voltage : 3.3 V • input voltage Servo motor : 4.2 V ~ 7.2 V • CPU : 32 digit • Baud Rate (USB) : 115200 • Transmission speed (bluetooth / UART) : 9600 • Flash storage capacity : 16M • Red indicator : power indicator CPU • Gree Indicator : servo engine indicator • Yellow flag : Mode Wireless PS2 Controller • protocol : UART • computer protocol : support • Individual work protocol : support • Dinner servo motor type : 9G ~ 55G (3.3 V ~ 7.2 V) • Online Operations Support : C51 / ARM / DSP / Buletooth / Computer • mode type : USB / UART / Offline Independent / PS2 wireless controller Package content • 1 x USB cable • 1×32 Channels Motor Controller Card VCC: Servo VCC input can be connected to 4.2 V-7.2 V power supply, plugged in the power supply to the anode, please. GND: General GND servo controller can be connected to GND supply GND power servo or CPU; connected to the power supply for the cathode, please. 5 V: Servo controller CPU power input VCC, you can only connect to 5V note: 5 V interface and the USB interface you can not access it weather. Yellow Pin: . Servo I / O connected to the entrance, he always yellow or yellow soil servo White Pin: Servo VCC connected to the input, he always servo red or dark red. Black Pin: Servo GND connected to the input he always brown or black servo. green circle position: . power input CPU GND for servo controller input only yellow circle position: power input CPU VCC servo controller, 5 V single output. purple circle position: UART port RX servo controller, he always access other devices UART TX port. orange circle position: port UART TX servo controller, you usually access other devices UART RX port. location, use four lines to align the Bluetooth sensor, 5V-VCC, GND-GND, RX-TX-RX.Install phone software and make a couple. software as open. using USB line to computer and servo controller attached to each other, do not forget to connect before setting mode. Download Software