LHT00SU1 Virtual Oscilloscope Logic Analyzer I2C SPI CAN UART

From Makers Electronics's description

LHT00SU1 Virtual Oscilloscope Logic Analyzer I2C SPI CAN UART The LHT00SU1 Virtual Oscilloscope Logic Analyzer I2C SPI CAN UART is a USB-connected multifunction test and measurement device that combines an oscilloscope, logic analyzer, data logger, voltmeter, frequency meter, PWM controller, frequency generator, I2C controller, and pulse/edge counter in a compact unit. It provides 8 digital channels for analyzing digital signals and 2 analog input channels with 1 selectable sampling channel for analog measurements. Features: Multifunction USB-based oscilloscope and logic analyzer. 8-channel digital logic analyzer. 2 analog input channels with 1 selectable sampling channel. 16MHz maximum sampling frequency. 3MHz maximum analog bandwidth. -10V to +10V analog input voltage range. 78mV analog sensitivity. 256-level maximum vertical resolution. Specifications: Parameter Value Model LHT00SU1 Device Type USB Virtual Oscilloscope and Logic Analyzer Analog Input Channels 2 channels Analog Sampling Channels 1 channel Maximum Sampling Frequency 16MHz Maximum Analog Bandwidth 3MHz Analog Input Voltage Range -10V to +10V Analog Sensitivity 78mV Maximum Vertical Resolution 256 levels Digital Channels 8 channels Digital Input Voltage 0V–5.3V Digital Low-Level Input <0.8V Digital High-Level Input >1.4V Supported Protocols SPI, I2C, UART, SMBus, I2S, CAN, Parallel, 1-Wire, PS/2, Custom, Search, Async USB Interface USB 2.0 High-Speed USB Interface Speed Up to 480Mbps Data Logger Supported Voltmeter Dual-channel Frequency Meter Supported Frequency Generator Supported PWM Controller Supported I2C Controller Supported Pulse/Edge Counter Supported Dimensions 104×55×30mm Test Clamp Cable Length 30cm USB Cable Length 150cm Applications: Embedded system debugging. Microcontroller development. Arduino and development-board projects. SPI communication analysis. I2C communication analysis. UART serial communication debugging. CAN bus signal analysis. Digital circuit troubleshooting. PWM signal testing. Frequency measurement. Pulse and edge measurement. Mixed analog and digital signal analysis. Electronic circuit development and testing. Communication protocol development. Educational electronics laboratories. Package Include: 1x LHT00SU1 Virtual Oscilloscope Logic Analyzer. 1x 10-Pin Test Clamp Cable. 10x Test Clips. 1x USB Connection Cable. Documents: instruction