TowerPro MG995 All Metal Gear Servo Motor (360° Continuous Rotation)

This is a TowerPro MG995 All Metal Gear Servo Motor ( 360° Continuous Rotation ). The MG995 Metal Gear 360° Continuous Rotation Servo Motor is a powerful and versatile servo solution for makers, engineers, students, and robotics enthusiasts who need dependable motion control in a wide range of applications. It is designed to deliver strong torque, quick response, and stable performance, making it suitable for RC vehicles, robotic mechanisms, automation systems, experimental platforms, and custom mechanical projects. This servo motor features a continuous 360-degree rotation design , allowing it to operate smoothly in applications that require ongoing rotational movement rather than limited angular positioning. This makes it especially useful in mobile robots, rotating platforms, wheel drive systems, actuator-based mechanisms, and various smart motion projects. The metal gear construction improves durability and mechanical strength, making the servo more suitable for demanding applications compared to standard plastic gear alternatives. It provides reliable operation under repeated use and helps maintain stable transmission performance in projects where consistent torque and long-term durability are important. The MG995 servo is also known for its fast control response , accurate operation , and strong torque output , which help it perform efficiently in systems where movement quality and load handling matter. Its design supports use in RC aircraft, RC cars, robotics platforms, mechanical arms, educational systems, and creative engineering prototypes. With its standard JR servo plug , the motor can be integrated easily with many controllers, receiver systems, and development platforms. The included cable simplifies installation, while the accessory horn set allows flexible mechanical connection for different motion linkages and mounting styles. Whether you are building a robot, upgrading an RC mechanism, or creating a custom movement system, the MG995 360° continuous rotation servo motor offers a practical combination of strength, durability, and control performance. Wire Description Red: Positive Brown: Negative Orange: Signal Features 360° continuous rotation servo motor Strong metal gear construction High torque performance Fast control response Accurate and stable movement Excellent holding capability Suitable for robotics and RC applications Durable design for repeated operation Standard JR servo connector Ideal for DIY, automation, and mechanical projects Specifications Item Type: Servo Motor Model Series: MG Series Model No.: MG995 Rotation: 360° Torque Rating: 9.4 to 11 kg·cm Operating Speed @ 6.6V: 0.16 sec / 60° Stall Torque @ 4.8V: 9.4 kg·cm Stall Torque @ 6.6V: 11 kg·cm Operating Temperature: -30°C to 60°C Gear Type: Metal Servo Plug Type: JR Cable Length: 30 cm Length: 40.5 mm Width: 20 mm Height: 44 mm Shipping Weight: 0.059 kg Shipping Dimensions: 9 × 8 × 6 cm Package Includes 1 × MG995 Metal Gear Servo Motor with Cable 1 × Set of Servo Horns One Point Horn Two Point Horn Four Point Horn 1 × Set of Screws 1 × Servo Horn Arm محرك سيرفو MG995 بتروس معدنية ودوران مستمر 360 درجة يُعد محرك سيرفو MG995 بتروس معدنية ودوران مستمر 360 درجة من المحركات العملية والقوية المناسبة للهواة والمهندسين والطلاب ومطوري الأنظمة الميكانيكية والروبوتية. تم تصميم هذا السيرفو ليقدم عزمًا قويًا ، و استجابة سريعة ، و أداءً ثابتًا في مجموعة واسعة من التطبيقات التي تحتاج إلى تحكم فعال في الحركة. يتميز هذا المحرك بتصميم الدوران المستمر 360 درجة ، وهو ما يجعله مناسبًا للتطبيقات التي تحتاج إلى حركة دورانية متواصلة بدلًا من الحركة الزاوية المحدودة. لذلك فهو مناسب جدًا للاستخدام في الروبوتات المتحركة، ومنصات الدوران، وأنظمة الدفع، والآليات الميكانيكية، والمشاريع الذكية المعتمدة على الحركة . كما أن التروس المعدنية تمنح السيرفو قوة تحمل أعلى ومتانة أفضل في الاستخدام العملي، وتجعله أكثر ملاءمة للتطبيقات التي تتطلب تشغيلًا متكررًا أو أحمالًا ميكانيكية أعلى. ويساعد هذا التصميم على تحسين الاعتمادية وإطالة العمر التشغيلي في المشاريع التي تحتاج إلى مكون قوي ومستقر. يوفر سيرفو MG995 أداءً جيدًا من حيث سرعة الاستجابة و ثبات الحركة و العزم المرتفع ، مما يجعله مناسبًا لتطبيقات عديدة مثل الطائرات والسيارات اللاسلكية، والروبوتات، والأذرع الميكانيكية، والمشاريع التعليمية، والنماذج التجريبية، وأنظمة التحكم المختلفة . يأتي السيرفو مزودًا بفيشة من نوع JR ، مما يسهل دمجه مع العديد من أنظمة التحكم والدوائر والمستقبلات الإلكترونية. كما أن وجود مجموعة الأذرع والمسامير داخل العبوة يساعد على التركيب السريع وربط السيرفو بسهولة داخل المشروع. إذا كنت تبحث عن محرك سيرفو قوي بتروس معدنية ودوران مستمر لمشروع روبوت أو نظام حركة أو تطبيق ميكانيكي عملي، فإن MG995 يعتبر اختيارًا ممتازًا يجمع بين القوة والمتانة وسهولة الدمج. توصيف ألوان الأسلاك الأحمر: موجب البني: سالب البرتقالي: إشارة المميزات سيرفو بدوران مستمر 360 درجة تروس معدنية قوية ومتينة عزم مرتفع استجابة سريعة للتحكم حركة دقيقة وثابتة قدرة تثبيت ممتازة مناسب لتطبيقات الروبوتات وRC تصميم عملي يتحمل التشغيل المتكرر فيشة سيرفو قياسية JR مناسب لمشاريع الهواة والأتمتة والأنظمة الميكانيكية المواصفات نوع المنتج: محرك سيرفو سلسلة الموديل: MG Series رقم الموديل: MG995 زاوية الدوران: 360 درجة قيمة العزم: من 9.4 إلى 11 كجم.سم سرعة التشغيل عند 6.6 فولت: 0.16 ثانية / 60 درجة عزم التوقف عند 4.8 فولت: 9.4 كجم.سم عزم التوقف عند 6.6 فولت: 11 كجم.سم درجة حرارة التشغيل: من -30 إلى 60 درجة مئوية نوع التروس: معدنية نوع الفيشة: JR طول الكابل: 30 سم الطول: 40.5 مم العرض: 20 مم الارتفاع: 44 مم وزن الشحن: 0.059 كجم أبعاد الشحن: 9 × 8 × 6 سم محتويات العبوة 1 × محرك سيرفو MG995 مع كابل 1 × مجموعة أذرع سيرفو ذراع نقطة واحدة ذراع نقطتين ذراع أربع نقاط 1 × مجموعة مسامير 1 × ذراع سيرفو

MG995 Servo Motor Tower Pro Continuous Rotation (Full Metal Gear) The MG995 Tower Pro Continuous Rotation Servo Motor is a high-performance, durable servo designed for applications that require full 360-degree continuous motion. Unlike standard servo motors that rotate to a specific angle (e.g., 0° to 180°), this version of the MG995 is modified to provide continuous rotation, making it ideal for wheeled robots, conveyor systems, mobile platforms, and other projects requiring bidirectional speed control. Equipped with full metal gears, including strong brass and steel components, the MG995 is built to handle mechanical stress and heavy loads without gear wear or failure. Its robust internal structure allows for higher torque output — up to 12 kg·cm at 6V — which is particularly beneficial for mobile robotics or lifting mechanisms. The inclusion of dual ball bearings enhances smooth motion and longevity, even under frequent or high-load usage. This servo is controlled using a PWM (Pulse Width Modulation) signal, but instead of controlling position, the pulse length controls the speed and direction of rotation. A 1.5 ms pulse stops the motor, pulses shorter than 1.5 ms make it spin in one direction, and pulses longer than 1.5 ms make it spin in the opposite direction. The further the pulse deviates from 1.5 ms, the faster the motor spins. The MG995 continuous rotation servo operates at a voltage range of 4.8V to 7.2V, with a typical operating speed of around 0.14–0.20 sec/60° equivalent, depending on voltage. Its standard 3-wire interface (orange for signal, red for VCC, and brown for GND) makes it easily compatible with Arduino, Raspberry Pi, and RC controllers. In summary, the MG995 Continuous Rotation Servo Motor is a powerful, reliable, and affordable solution for motion control in DIY robotics, smart automation, and RC-based projects. Features: Full 360° Continuous Rotation: Moves freely in either direction — ideal for wheels, conveyor belts, or rotating platforms. Speed and Direction Control via PWM: Easily control how fast and in which direction it spins using simple pulse signals. Strong and Durable Metal Gears: Built with full metal gears that last longer and handle more stress than plastic ones. Powerful Torque for Heavy Loads: Can move or drive heavier objects with ease — great for mobile robots or lifting systems. Stable and Smooth Operation: Dual ball bearings reduce noise and friction, giving a smooth and reliable motion. Plug-and-Play with Arduino & RC: Connects easily to common platforms like Arduino, Raspberry Pi, or RC controllers — no complicated setup. Stays in Motion Until You Tell It to Stop: Unlike regular servos, it keeps spinning as long as you send the right signal. Compact and Fits Anywhere: Small enough to fit in tight spaces while still offering strong output. Affordable and Beginner-Friendly: Offers high performance for a low cost, making it ideal for students, hobbyists, and prototype projects. Great for DIY Robotics and Smart Projects: Perfect for smart cars, automatic doors, animatronics, and other creative builds. Specifications: Specification Details Model: Tower Pro MG995 (Continuous Rotation) Rotation Type: Continuous 360° rotation (bidirectional) Control Method: PWM (Pulse Width Modulation) Speed Control: Varies with pulse width (longer/shorter than 1.5 ms) Stop Pulse Width: ~1.5 ms (motor stops rotating) Direction Control: <1.5 ms = rotates one way, >1.5 ms = rotates the other way Operating Voltage: 4.8V – 7.2V Stall Torque: ~10 kg·cm @ 4.8V / ~12 kg·cm @ 6.0V Operating Speed: ~0.14 – 0.20 sec/60° equivalent (used to estimate spin rate) Gear Material: Full Metal (Brass + Steel) Bearings: Dual Ball Bearings Connector Type: 3-pin (Signal, VCC, GND) JR style Wire Colors: Orange = Signal, Red = VCC, Brown = Ground Cable Length: 30 cm Dimensions (L×W×H): 40.7 mm × 19.7 mm × 42.9 mm Weight: ~55 grams Temperature Range: 0°C – +55°C Compatibility: Arduino, Raspberry Pi, RC receivers, PWM controllers Wire Connections: Wire Color Function Connects To ???? Orange Signal (PWM) Arduino/Raspberry Pi Digital PWM Pin ???? Red VCC (Power) +5V or +6V Power Supply ???? Brown Ground (GND) Ground (GND) on Power Supply & Microcontroller PWM Control Table: PWM Pulse Width Action Rotation Direction Speed ~1.0 ms Full speed clockwise Clockwise Fast ~1.3 ms Medium speed clockwise Clockwise Medium ~ 1.5 ms Stop (neutral position) None Stopped ~1.7 ms Medium speed counterclockwise Counterclockwise Medium ~2.0 ms Full speed counterclockwise Counterclockwise Fast Applications : Robotic Arms & Manipulators. Humanoid & Walking Robots. RC Vehicles (Cars, Boats, Planes). Pan-Tilt Camera Systems. 3D Printers & CNC Machines. Mechatronics & Educational Projects. DIY Animatronics & Props. Home Automation Systems. Prototyping of Automated Systems. Gimbals and Stabilization Platforms.

MG995 is a servo motor that is popular for its performance and low price. The motor is used in many applications mainly robotics and drones. MG995 Servo Motor Pinout Configuration MG995 has three terminals as mentioned in the pin diagram and the function of each pin is given below. Pin Name Function 1 Signal pin (Orange pin) The PWM signal which states the axis position is given through this pin. 2 VCC (Red pin) Positive power supply for servo motor is given to this pin. 3 Ground(Brown pin) This pin is connected to ground of circuit or power supply. MG995 Features and Electrical Characteristics Half metal geared servo Stable and shockproof double ball bearing design Fast control response Constant torque throughout the servo travel range Excellent holding power Operating voltage range: 4.8 V to 7.2 V Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6v) Operating speed: 0.2 s/60º (4.8 V), 0.16 s/60º (6 V) Continuous Rotation Dead band width: 5 μs Operating temperature range: 0ºC to +55ºC Current draw at idle: 10mA No load operating current draw: 170mA Current at maximum load: 1200mA Applications Drones and RC planes Security camera Robotics Solar tracking and positioning Door locks and safe locks Hobby projects