TIL116 Optocoupler with Transistor Output 30V 5mA DIP-6

From the shop's description

TIL116 Optocoupler with Transistor Output 30V 5mA DIP-6 The TIL116 is an optically coupled isolator consisting of a gallium arsenide infrared emitting diode and a high-current transfer ratio silicon NPN phototransistor mounted in a plastic dual-in-line package. This design allows for electrical isolation between the input and output circuits, protecting sensitive control electronics from high voltages, ground loops, and noise on the output side. It is commonly used to interface logic signals between systems operating at different voltage potentials or to provide a safety barrier in power supply and motor control circuits. With its ability to handle continuous input current and provide a clean, amplified output signal, the TIL116 serves as a robust solution for digital logic interfacing and AC mains detection. This optocoupler is characterized by its high direct-current transfer ratio, ensuring efficient signal transmission with minimal input drive. The device’s construction ensures stable performance across a wide range of humidity and temperature conditions, while its high-voltage electrical isolation makes it suitable for industrial and consumer applications requiring safety certification. The phototransistor output can switch loads up to 30 volts, making it compatible with TTL/CMOS logic and various microcontroller inputs. For applications needing to switch higher power loads, the TIL116 is often used to drive a separate power transistor or relay. Features: Gallium Arsenide Infrared Diode Source. Optically Coupled to a Silicon N-P-N Phototransistor. High Direct-Current Transfer Ratio. High-Voltage Electrical Isolation. High-Speed Switching Capability. Plastic Dual-In-Line Package. Stable Operation in High-Humidity Conditions. Withstands Soldering Temperatures. Specifications: Parameter Conditions Min Typ Max Unit Input- to-Output Voltage TIL116 only 2.5 – – kV Collector-Emitter Voltage (VCEO) I_C = 10 μA, I_F = 0 30 – – V Emitter-Collector Voltage 7 – – V Input Diode Continuous Forward Current T_A = 25°C – – 100 mA On-State Collector Current (I_C(ON)) I_F = 16 mA, V_CE = 0.4 V 2 7 – mA Off-State Collector Current (I_C(OFF)) V_CE = 10 V, I_F = 0 – – 150 nA Input Diode Static Forward Voltage (V_F) I_F = 16 mA – 1.2 1.4 V Total Power Dissipation T_A = 25°C – – 250 mW Rise/Fall Time (t_r, t_f) V_CC = 10 V, R_L = 100 Ω – 5 10 μs Storage Temperature Range -65 – 150 °C Pinout: Pin Name Description 1 Anode Input LED Anode 2 Cathode Input LED Cathode 3 NC Not Connected 4 Emitter Phototransistor Emitter 5 Collector Phototransistor Collector 6 Base Phototransistor Base Footprint: Applications: Logic-to-Logic Isolation. Interfacing Microcontrollers to AC Mains or High-Voltage Circuits. Power Supply Feedback Control. Motor Drive Circuit Isolation. Ground Loop Elimination. Relay and Solenoid Drive Circuits. Programmable Controllers. Digital Signal Isolation. Packages: 1x TIL116 Optocoupler with Transistor Output 30V 5mA DIP-6. Documents: TIL116 Datasheet.