Thermoelectric Cooler (Peltier) SP1848-27145 40X40mm

From the shop's description

Thermoelectric Cooler Peltier SP1848 The principle of how does a refrigerator work is pretty simple. Gases get hotter when you compress them into less volume because you have to work to push their energetic molecules together. When you expand a gas, it is suddenly able to occupy much more volume. Heat energy its molecules divide over a much bigger volume of space, so the temperature of the gas cools. This same principle applies to thermoelectric coolers. Thermoelectric coolers operate according to the Peltier effect. The effect creates a temperature difference by transferring heat between two electrical junctions. A voltage is applied across joined conductors to create an electric current. When the current flows through the two conductors’ junctions, heat escapes at one junction, and cooling occurs. Heat goes at the other junction. This TEC/TEG with a model number SP1848-27145 has a size of 40mm x 40mm x 4mm. It uses 4.8V and 660mA to operate and produce heat. There are 2 sides to this module, one is the cooling side, and the other is heating. To identify which side is which, you only have to look for the text imprinted in the module. The printed side is the cooling side, and the blank side is the hot side. You could also add a heatsink for the dissipation of heat and to protect you from getting burned. You only need to supply this with 4.8V and the connection is as follows: RED for the positive side and BLACK for the negative side. Temperature (°C) 20 40 60 80 100 Open circuit voltage (V) 0.97 1.8 2.4 3.6 4.8 Current (mA) 225 368 469 558 669 Specifications: Model: SP1848-27145 Maximum Voltage- Vmax (V) : 4.8VDC Maximum Current- Imax (A) : 670mA Maximum Power: 3.2W Wire size: lead length 300mm ± 5mm RV standard wire single head 5mm tinned Size: 40mm x 40mm x 3.6mm Side with the word is near to the cooling surface (cold side) Side with No word is near to the endothermic side (hot side) Red wire to positive and black wire to negative, as long as there is a temperature difference,it can generate electricity. These devices must be used in conjunction with a heat sink to avoid burned Features : Small and lightweight, convenient for use. Designed specifically for power generation. Sealed for moisture protection and contain thermal elements formulated for optimum Seebeck power generation. High-temperature 120°C, with NM static protection. Quality tested cooling cells. Simple to install and operate. with 5v Booster board you can charge the cell phone