DS1302 RTC Real Time Clock Module No Battery

DS1302 RTC Real Time Clock Module No Battery RTC DS1302 is DALLAS company launched a trickle charge clock chip, containing a real-time clock/calendar and 31 bytes of static RAM, communicating through serial interface simple and single-chip microcomputer. The real-time clock/calendar circuit provides seconds, hours, days, weeks, months, years of information, a number of days in the month and leap year can automatically adjust. The clock operation instructions through the AM/PM decided to use 24 or 12-hour format. Between DS1302 and single-chip microcomputer can simply use synchronous serial communication method, only three lines: (1) RST (2) I/O reset the data line (3) SCLK serial clock. Clock /RAM read/write data to a byte character set or as many as 31-byte communication. DS1302 work power consumption is very low to keep the data and clock information when power is less than 1mW Wiring method (to provide procedures, for example, can pick up any IO port, in the procedure to modify the port definitions : VCC:+5V/3.3V GND: GND CLK: P02 DAT: P01 RST: P00 Note: 1.VCC and GND do not reverse, so as not to burn the chip 2.51 SCM P0 port to receive a pull-up resistor, if your computer is not connected pull-up resistor, the data can be the string to the other port. Specifications and Features: The real-time clock counts minutes, seconds, date, hours, month day of the week, year and leap-year compensation up to 2100. 318 temporary data storage RAM Working current of 2.0V, less than 300nA Read / Write clock or RAM data with two kinds of mode of single-byte transfer mode and multi-byte character set 8 pin DIP package or optional 8 pin SOIC package based on the surface assembly Simple 3 wire interface Compatible with TTL Vcc=5V Double power supply pipe for main power and backup power supply. Useful Links: Arduino DS1302 Real Time Clock Using the Real-Time Clock module on Raspberry Pi Package Includes: 1 x DS1302 RTC Real Time Clock Module Input Supply Voltage (VDC) 3.3 Operating Voltage (VDC) 2V ~ 5.5 Operating Temperature (°C) -40 to 85 Storage condition (℃) -55 to 125 Length (mm) 43 Width (mm) 23 Height (mm) 13 Weight (gm) 9 Shipment Weight 0.014 kg Shipment Dimensions 6 × 3 × 2 cm

This RTC DS1302 Real Time Clock Module allows you to use your Arduino or MCU to do time / date related functions such as: Starting a task at a specific date / time or recording the date / time of an event or simply displaying the time / date to a user. Features: DS1302 timing IC This real time clock has the ability track second, minute, hour, day, week, month, year, and the ability to adjust a leap year Wide working voltage: 2.0~5.5 V When The working voltage is 2.0V, the current is less than 300nA Read/write clock or RAM data have two transmission modes: Single-byte / many bytes group Simple 3 line interface. Easy to install Pin out: VCC -> Vsupply (Arduino 3.3V) GND -> Arduino Gnd CLK -> (SCLK_PIN) DAT -> (IO_PIN) RST -> (CE_PIN)