Arduino Nano V3.0 CH340 Chip Type-C, photo 2

Arduino Nano V3.0 CH340 Chip Type-C, photo 3

Arduino Nano V3.0 CH340 Chip Type-C

Part number CH340

1 offer in stock at 1 shopEGP 235

EGP 235 at Ampere Electronics

Offers

lowest price first

Each offer shows the shop's own title.

Arduino Nano V3.0 CH340 Chip Type-C
Ampere Electronics
checked 12 days ago
EGP 235
View

Show 1 out of stock offer

Arduino Nano with CH340 Uplaoder – Mini USB (Unsoldered)
Makers ElectronicsOut of stock
checked 27 days ago
EGP 225
View

Details

FromMakers ElectronicsAmpere Electronics

From Makers Electronics's description

Nano (Arduino Nano Compatible Atmega328p+CH340) is based on famous Arduino platform and does all the functions of Uno, but with a smaller footprint.This development board provides small plate with the same powerful microcontroller. It is compatible with Arduino and ideal for fast prototyping and easy integration. It’s vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good. The board equips a low-cost USB-Serial Chip that makes it less in price than Nano with FTDI USB-Serial Chip used on older versions of Arduino Nano.The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 . It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one. The board can be powered via the mini-USB connection, 6-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.The size of board is only 43 mm x 18 mm, it comes with 6 PWM I/O from the total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory. It can be programmed directly from the Arduino IDE, using the USB mini connection. Note : This board is a 100% compatible clone version with same design as Arduino Nano. It is not the original version which is made in Italy. CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers. Specifications: Microcontroller: Atmega328P-AU MCU Voltage: 5V Input Voltage: 7V – 12V I / O pins: 14 PWM pin 6 (out of 14 I / O) ADC pin: 8 (out of 14 I / O) Flash Memory: 32KB (2KB used by bootloader) SRAM:2 KB EEPROM:1 KB Current I / O pin: 40mA / pin Communication: TWI, SPI and UART Operating frequency: 16MHz Dimensions: 45mm x 18mm Features : 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Support USB download and Power Support for external 5V ~ 12V DC power supply Support power supply by 9V battery Support ISP download Automatic reset during program download Power OK blue LED on the bottom Green (TX), red (RX) and orange (L) LED +5V to AREF jumper Auto sensing/switching power input Small mini-B USB for programming and serial monitor ICSP header for direct program download Standard 0.1” spacing DIP (breadboard friendly) Manual reset switch to learn more information about Arduino Nano you can visit the official website of Arduino through below link:

Similar products

EGP 235checked 12 days ago

View at Ampere Electronics

Arduino Nano V3.0 CH340 Chip Type-C

Offers

Details

From Makers Electronics's description

From Ampere Electronics's description

Similar products