Bambu lab A1 Combo (Global)

Bambu Lab A1 Machine 3D Printer Fully automatic calibration The A1 Bambu Lab autonomously manages all printing settings such as Z offset, bed level, vibration resonance or nozzle pressure for all your projects to offer you an optimal result effortlessly. Active flow compensation The A1 revolutionizes flow control in 3D printing thanks to its high-frequency, high-resolution eddy current sensor that measures the pressure in the nozzle. An algorithm then actively compensates for the extrusion flow in fineness. Easy nozzle change The new print head design offers the ability to remove and replace the hotend simply by clipping it in. Quiet operation The Bambu Lab A1 is able to fine-tune each movement motor to eliminate any annoying noise during printing. Remote control You can monitor and control your machine remotely from Bambu Studio or Bambu Handy. The built-in camera also allows you to make timelapse videos. Quality and speed The A1 prints the test boat in just 14 minutes, meeting all quality constraints thanks to its all-metal guides, rigid structure, accelerometer, powerful MCU and, above all, its advanced motion control system. It achieves this performance provided that specialized filaments are used. Factory calibrated, it is ready to perform all your tasks right out of the box. Technical characteristics Technology: FDM Print volume: 256 × 256 × 256 mm Maximum nozzle temperature: 300°C Extrusion head: Full metal Extruder: Stainless steel Nozzle diameter: 0.4 mm (can be changed to a 0.2, 0.6 or 0.8 mm nozzle) Filament diameter: 1.75 mm Printing plate: Bambu PEI textured Maximum plate temperature: 100°C Maximum print head speed: 500 mm/s Acceleration: 10 m/s² Supported materials: PLA, PETG, TPU, PVA Physical characteristics Machine dimensions: 385 x 410 x 430 mm Package dimensions: 552 x 532 x 320 mm Net weight: 8.3 kg Package weight: 14.3 kg Equipment Monitoring camera: Up to 1080px Filament end sensor: Yes Filament odometer: Yes Coil oscillation sensor: Yes Resume printing function after interruption: Yes Included with the machine ▷ A print bed ▷ A stainless steel hotend ▷ A spool holder ▷ Purge wiper ▷ A PTFE tube ▷ Bambu filament samples (random colors) ▷ A box of accessories and tools