LM710CN Voltage Comparator IC PDIP-14

From the shop's description

LM710CN Voltage Comparator IC PDIP-14 The LM710CN Voltage Comparator IC PDIP-14 is a high-speed voltage comparator intended for use as an accurate, low-level digital level sensor or as a replacement for operational amplifiers in comparator applications where speed is of prime importance. The circuit has a differential input and a single-ended output with saturated output levels compatible with practically all types of integrated logic. The device is built on a single silicon chip which insures low offset and thermal drift. The use of a minimum number of stages along with minority-carrier lifetime control makes the circuit much faster than operational amplifiers in saturating comparator applications. In fact, the low stray and wiring capacitances that can be realized with monolithic construction make the device difficult to duplicate with discrete components operating at equivalent power levels. Features High-speed comparator with typical response time ~40ns for small overdrives, enabling fast threshold detection and pulse discrimination. Low input offset voltage and low input bias to minimize error at the decision threshold. Single-ended output with useful sink/source capability. Peak output current up to 10mA for driving logic stages or small transistors. Available in PDIP-14 and for easy prototyping and board-level replacement. PINOUT Pin Name Description 1 NC No Connection 2 GND Ground 3 +IN Non-Inverting Input 4 –IN Inverting Input 5 NC No Connection 6 V– Negative Supply Voltage 7 NC No Connection 8 NC No Connection 9 OUT Output 10 NC No Connection 11 V+ Positive Supply Voltage 12 NC No Connection 13 NC No Connection 14 NC No Connection Specifications Absolute Maximum Ratings Positive Supply Voltage +14V Negative Supply Voltage −7V Peak Output Current 10mA Output Short Circuit Duration 10 seconds Differential Input Voltage ±5V Input Voltage ±7V Power Dissipation 950mW Operating Temperature Range 0°C to +70°C Storage Temperature Range −65°C to +150°C Lead Temperature (Soldering, 10 sec.) 260°C Note: for full electrical specifications, performance curves, or test circuits, please read the datasheet at the end of the page. Applications High-speed threshold detection and pulse-height discrimination circuits. A/D converter front-end comparators and fast sampling/strobe logic. Schmitt trigger and level-shifting interfaces for mixed-signal designs. Line receivers, alarm and test equipment requiring fast, low-offset comparators. General-purpose fast comparator replacement in legacy and new designs. Package Contents 1x LM710CN Voltage Comparator IC PDIP-14. Documents Datasheet LM710CN CAD Files Download