Color Sensor Recognition Module TCS3200

TCS3200 Color Sensor Module – High-Fidelity Color Detection for Embedded Systems ​ Features: Integrated Color Sensing: Combines an array of photodiodes with red, green, blue, and clear filters, facilitating accurate color detection. ​ Programmable Output Frequency: Allows customization of the output frequency scale to suit specific application requirements. ​ Direct Microcontroller Interface: Outputs a square wave frequency directly proportional to light intensity, simplifying integration with microcontrollers. ​ Single-Supply Operation: Operates efficiently with a single supply voltage ranging from 2.7V to 5.5V, enhancing design flexibility. Compact Form Factor: Encapsulated in a 5mm x 6.2mm surface-mount package, optimizing space utilization in embedded designs. Specifications The Break-out board has TCS3200 color sensor Support 3V-5V voltage input Four bright white LED, on-board, can illuminate the object which does not emit light itself. Controllable light-emitting tube. S1 S2 S3 S4 can be used as the pull-up or pull-down resistors on board. PCB Size: 23mm X 30mm Applications: Color Sorting Systems: Differentiates objects based on color for automated sorting processes. ​ Color Matching: Ensures precise color matching in manufacturing and quality control. ​ Ambient Light Sensing: Adjusts device settings based on surrounding light conditions to enhance user experience. ​ Test Strip Analysis: Interprets color changes in diagnostic test strips for medical applications. ​ Interactive Displays: Detects user interaction through color changes, enabling dynamic display responses.

The TCS3200 Color Recognition Sensor Module uses a high-quality light sensor allowing you to sense any color through a combination of Red, Green, and Blue. The module provides all of the pins of the TCS3200 on convenient 0.1″ headers – ideal for use with PCBs, breadboard or stripboard. Four white LEDs provide plenty of light for the color sensor and allow you to use the module in any ambient light. The module requires only a single supply voltage between 2.7V and 5.5V – making it compatible with nearly all common microcontrollers, including PICs , AVRs, ARM, Arduino and more! The pinout is clearly labeled on the board and is as follows Header one on the left side of the board S0: Output frequency scaling selection input (along with S1) S1: Output frequency scaling selection input (along with S0) OE: Output Enable – if held low, the output of the module is turned on GND: Ground – connect to 0V Header two on the right side of the board S3: Photodiode type (along with S2) S2: Photodiode type (along with S3) OUT: Output – A square wave appears here showing the intensity of the detected colour VCC: Power – connect to 2.7V-5.5V The Photodiode type pins allow you to pick which color light you are currently detecting: S2 S3 Photodiode type Low Low Only red light Low High Only blue light High Low No filter High green light By combining the reading of each of the three colors, you can identify any visible color! Features : High-resolution conversion of light intensity to frequency. Chip pins all has drawn for standard 100. Put the needle (2.54 mm). Mil-convenient for bitmap board. Programmable color and full-scale output frequency. Communicate directly with a microcontroller. Low-profile surface mount package. Package Includes : 1 x TCS3200 Color Recognition Sensor Module SPECIFICATIONS Operating Voltage (VDC) 3 ~ 5 Best Detection Range(mm) 100 Length (mm) 32 Width (mm) 25 Height (mm) 11 Weight (gm) 4 Shipment Weight 0.03 kg Shipment Dimensions 5 × 4 × 3 cm Data Sheet

The TCS3200 Color Sensor Recognition Module detects and measures color intensity using an array of photodiodes with red, green, blue, and clear filters . It helps you build color detection and recognition systems for Arduino, Raspberry Pi, and other microcontrollers . This module converts the color light intensity into a square-wave frequency output , which changes according to the detected color. You can easily connect it to your microcontroller via digital pins and read accurate color data in real time. The TCS3200 sensor chip ensures high sensitivity, fast response, and excellent accuracy , even under different lighting conditions. You can adjust the output frequency scaling using onboard control pins (S0–S3) to fit your project’s needs. Because it includes a built-in white LED and standard pin headers , you can mount and use it directly in robotic vision, color sorting, and smart detection projects . Key Features: Model: TCS3200 Color Sensor Module Detects red, green, blue, and clear light Output: Frequency signal proportional to color intensity Adjustable output scaling via S0–S3 pins Operating Voltage: 3V–5V DC Built-in white LED for consistent illumination Compatible with Arduino, Raspberry Pi, STM32, and ESP32 Ideal for robotics, color sorting, and object recognition systems The TCS3200 Color Sensor Module lets students, hobbyists, and engineers create accurate and reliable color recognition systems with ease and flexibility.

TCS3200 Color Sensor Module This module consist of a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The main part of the module is the TCS3200 chip which is a Color Light-to-Frequency Converter. The white LEDs are used for providing proper lighting for the sensor to detect the object color correctly. This chip can sense a wide variety of colors and it gives the output in the form of corresponding frequency. This module can be used for making color sorting robots, test strip reading, color matching tests etc. Features: Input voltage: (2.7V to 5.5V) Interface: Digital TTL High-resolution conversion of light intensity to frequency Programmable color and full-scale output frequency No need of ADC(Can be directly connected to the digital pins of the microcontroller) Power down feature Working temperature: -40oC to 85oC Size: 28.4×28.4mm(1.12×1.12″) Package Includes: 1x Color Sensor Module Datasheet: TCS3200 Color Sensor Datasheet Related Products: SENSORS | MODULES